WIPATH – YOUR PAGING SOLUTION PROVIDER
WiPath designs and manufactures a range of innovative and unique paging products for wide area and onsite paging.
SitePage pocsag store and forward
SPPSF Store and Forward Transmitter is a low cost POCSAG paging repeater.
It receives either POCSAG or Flex paging signals from a wide area carrier or local transmitter and retransmits POCSAG locally. It can also act as a link for further transmissions.
- SPPSF Store and Forward Transmitter can be used in hospitals, hotels, factories, supermarkets, restaurants, schools, rest homes, retirement villages, etc.
SPPSF Applications:
- Network expansion.
- In-building coverage expansion.
- Coverage Infill.
- Cross band repeater (Flex to POCSAG).
- Cross frequency repeater.
Retransmit all capcodes or just a selection
Battery backed real time clock
Up to 12 local alarms may be monitored
Receivers available for most paging bands
Local message input available
VHF & UHF Transmitters available
Relay control outputs (4)
Capcode & message activated
| Receiver | Synthesised | |
| Frequencies | 148-174, 450-470, 929-932 MHz (Other frequencies by request) | |
| Protocols | Pocsag & Flex | |
| Channel Spacing | 25 KHz | |
| Data Reception Rate | 512-2400 bps (Pocsag) 1600/2-6400/4 (Flex) | |
| Frequency Deviation | +/- 4,5 KHz | |
| Receiving Sensitivity | 5 uV at 1200 bps | |
| Selectivity | better than 60 dB | |
| Image Rejection |
| |
| Spurious Rejection | better than 55 dB | |
| Frequency Stability | 10 ppm at -10C~+60C | |
| Transmitter | FM/FSK NRZ Synthesised | |
| Power output | 5W standard (other available on request) | |
| Power | 30mA on standby, 1.2A transmitting | |
| Current | 30mA on standby, 1.2A transmitting | |
| Physical | 300 x 230 x 38mm (Excluding connectors and flanges) | |
| Operating Temperature Range | -10oC to 70oC | |
| Antennae connectors | BNC | |
| Relay ratings | 1A @12VDC |