Call us: +64-9-3021142

Email us: info@wipath.co.nz

Working Hours: 8.30am - 5pm

Paging Data Receiver PDR3000

  • Home
  • Paging Data Receiver PDR3000

WIPATH – YOUR PAGING SOLUTION PROVIDER

WiPath designs and manufactures a range of innovative and unique paging products for wide area and onsite paging.

Paging Data Receiver- PDR3000

The PDR3000 Paging Data Receiver is a multi-function paging data receiver/off air decoder/pager. It can receive paged messages and process them in a variety of ways.

Paging Data Receiver can be used for:-

  • Message Monitoring & Printing
  • Broadcast Services
  • Paging Infill and Rebroadcast
  • Data Transfer
  • LED Sign Control Remote switching
  • NurseCall and Plant Monitoring/Control
  • Print messages directly to a parallel or serial printer,
  • Outputs the message data via two serial ports in a number of different formats and protocols.
  • Can be fitted with up to four relay control outputs internally
  • Can interface with the RCM3000 Relay Control Module for multiple relay control.
  • Inbuilt search and replace text facility for manipulating the incoming messages.

Other options include an inbuilt pocsag paging encoder for repeater or rebroadcast applications and other specialised serial data inputs and outputs for control of devices such as LED signs.

 

 

WiPath has developed a wide range of applications that use the considerable functionality of the PDR3000.

  • Text search and replace
  • Relay control by message or individually by capcode
  • Output to Relay Control Modules (32 relays ea.)
  • Custom software design for message data manipulation and control available on request
  • TNPP encoding and decoding
  • Inbuilt pocsag encoder
  • Time and date stamping of messages
  • Receivers available for most paging bands (VHF, UHF, 900MHz)

Pocsag and Flex™ versions available

Parallel printer output (centronix)

Serial data port (2 optional)

Relay outputs switching 12V 1A (1-4 relays optional)

External antenna on BNC connector

Power requirements 12 volt DC

Very large number of cap codes (>2000)

Physical (provisional) 220 x 70 x 30mm

Battery backed real time clock

ProtocolsAvailable in Pocsag and Flex
Outputs (opt)1 parallel port, 2 serial ports, 4 Relays, 12 alarm inputs
Message memory40 standard, 10 locked, 10 maildrop messages
ReceiverSynthesized FM/FSK
Frequencies134-139, 148-174, 408-412, 450-470, 929-932 MHz
  
  
Channel Spacing25 KHz (12.5kHz optional)
Data rate 512-2400 pocsag, 1600/2 -6400/4 Flex
Freq. Deviation+/- 4,5 KHz
Rx Sensitivity5 uV at 1200 bps
Selectivitybetter than 60 dB
Image Rejectionbetter than 55 dB
Spurious Rejection better than 55 dB
Frequency Stability10 ppm at -10C~+60C
Antenna50 Ohm BNC (VHF & UHF), SMA (900MHz)
Power10-32VDC (12VDC nominal)
CurrentTypical 30mA in standby, 300mA max
Physical230 x 94 x 56 mm (~9 x 3.5 x 2in) (excl. bracket)
Operating Temp.-10 -+70degC (-40 – +70degC version available)
RelaysRated 1A @ 12VDC
GeneralRSSI level indication
On board real time clock with back up battery
Up to 12 alarm inputs
Pocsag data encoder
Transmitter control output – PTT and data
The output configuration is dependent on the product version selected. The following outputs are optionally available:
  • Parallel printer output (centronix)
  • 2 Serial data input/output
  • 4 Relay outputs
  • 12 Alarm inputs
  • Modem control
  • Pocsag encoder output
  • Transmitter control (PTT)
  • TNPP encoding and decoding
  • Relay Control Module outputs (27 relays per module – external)