- Synthesized receivers available for most paging bands (VHF, UHF, 900MHz)
- Pocsag and Flex™ versions available
- Serial data port
- External antenna on BNC connector
- Power requirements 9-15 volt DC
- Very large capcode capacity
- Physical 104 x 57 x 14 mm
- Text search and replace
- Inbuilt pocsag encoder
- Custom software design for message data manipulation and control available on request.
WIPATH – YOUR PAGING SOLUTION PROVIDER
WiPath designs and manufactures a range of innovative and unique paging products for wide area and onsite paging.
Paging Serial Receiver PSR3000
Paging Serial Receiver PSR3000 is a powerful and low cost paging receiver/decoder with a single serial data or TTL output.
Paging Serial Receiver can be used for:-
- Remote Control and LED Sign Control
- Broadcast Services
- Machinery switching and control
- Load shedding
- Remote telemetry control
- Plant Monitoring/Control
- Warning systems
- PSR3000 – Paging Serial Receiver has an M16 processor, which provides a significant amount of data processing capability.
- It can be used for a wide range of data control applications such as message logging, remote control, LED sign control, load shedding etc.
- PSR3000 has 2 relay outputs and 2 digital control outputs and may be interfaced with the RCM3000 Relay Control Board for multiple relay output.
Paging Serial Receiver PSR3000 is designed to be supplied as an OEM device to allow other manufacturers to “paging enable” their own equipment or systems.
WiPath has developed a wide range of applications that use the considerable functionality of the PSR3000.
| Protocols | Available in Pocsag and Flex |
| Outputs (opt) | 1 serial port, 2 Relays, 2 digital alarm inputs (Opt) |
| Message memory | 40 standard, 10 locked, 10 maildrop messages |
| Receiver | Synthesized FM/FSK |
| Frequencies | 134-139, 148-174, 408-412, 450-470, 929-932 MHz |
| Channel Spacing | 25 KHz (12.5kHz optional) |
| Data rate | 512-2400 pocsag, 1600/2 -6400/4 Flex |
| Freq. Deviation | +/- 4,5 KHz |
| Rx Sensitivity | 5 uV at 1200 bps |
| Selectivity | better than 60 dB |
| Image Rejection | better than 55 dB |
| Spurious Rejection | better than 55 dB |
| Frequency Stability | 10 ppm at -10C~+60C |
| Antenna | 50 Ohm BNC (VHF & UHF), SMA (900MHz) |
| Power | 10-32VDC (12VDC nominal) |
| Current | Typical 30mA in standby, 300mA max |
| Physical | 104 x 57 x 14 (mm) |
| Operating Temp. | -10 -+70degC (-40 – +70degC version available) |
| Relays | Rated 1A @ 12VDC |
The output configuration is dependent on the product version selected. The following outputs are optionally available:
- 1 Serial data input/output
- 2 Relay outputs
- Modem control
- Pocsag encoder output
- Transmitter control (PTT)
- TNPP encoding and decoding
- Relay Control Module outputs (27 relays per module – external)