Call us: +64-9-3021142

Email us: info@wipath.co.nz

Working Hours: 8.30am - 5pm

Relay Control Module RCM3000

WIPATH – YOUR PAGING SOLUTION PROVIDER

WiPath designs and manufactures a range of innovative and unique paging products for wide area and onsite paging.

Relay Control Module RCM3000

RCM3000 relay control module can be controlled by any of WiPath paging or wireless data products such as the PDT3000, PDR3000. Its relays can also be operated directly from a PC or other serial output device.

There are three of ways of addressing the individual relays:

Each relay (including downstream on the daisy chain) can be individually addressed and controlled, using one of the 3 following methods:
 
Capcode Any one relay can be programmed to activate on any message received on a particular capcode. Multiple instances of the same capcode can be setup to control multiple relays.
Message text Any one relay can be programmed to activate on any message received containing specified text. Multiple instances of the same text can be setup to control multiple relays.
Direct protocol A standard message protocol that directly controls the relay board without any additional programming setup.  This protocol has simple commands to clear all relays, set and clear a particular relay or set one for the specified amount of time.
No. Relay Outputs per board 27
Relay Load Capacity 3A @ 250Vac/30Vdc (25), 7A @110/240VAC (2)
Serial Ports memory 2 (RJ45 – 3 pins used)
Relay Connector Screw connectors
Serial Connectors RJ45
Power 12Vdc
Current 50-100mA plus 16-20mA per activated relay. 800mA max
Dimensions 194x147x35mm (approx7.5”x6”x1.25”)

Daisy Chain Serial Cable