- Synthesized receivers available for most paging bands (VHF, UHF, 900MHz)
- Pocsag and Flex™ versions available
- Serial data port
- External antenna on BNC connector
- Power requirements 9-15 volt DC
- Very large capcode capacity
- Physical 104 x 57 x 14 mm
- Text search and replace
- Inbuilt pocsag encoder
- Custom software design for message data manipulation and control available on request.
WIPATH – YOUR PAGING SOLUTION PROVIDER
WiPath designs and manufactures a range of innovative and unique paging products for wide area and onsite paging.
Paging Serial Receiver PSR3000
Paging Serial Receiver PSR3000 is a powerful and low cost paging receiver/decoder with a single serial data or TTL output.
Paging Serial Receiver can be used for:-
- Remote Control and LED Sign Control
- Broadcast Services
- Machinery switching and control
- Load shedding
- Remote telemetry control
- Plant Monitoring/Control
- Warning systems
- PSR3000 – Paging Serial Receiver has an M16 processor, which provides a significant amount of data processing capability.
- It can be used for a wide range of data control applications such as message logging, remote control, LED sign control, load shedding etc.
- PSR3000 has 2 relay outputs and 2 digital control outputs and may be interfaced with the RCM3000 Relay Control Board for multiple relay output.
Paging Serial Receiver PSR3000 is designed to be supplied as an OEM device to allow other manufacturers to “paging enable” their own equipment or systems.
WiPath has developed a wide range of applications that use the considerable functionality of the PSR3000.
| Protocols | Available in Pocsag and Flex |
| Outputs (opt) | 1 serial port, 2 Relays, 2 digital alarm inputs (Opt) |
| Message memory | 40 standard, 10 locked, 10 maildrop messages |
| Receiver | Synthesized FM/FSK |
| Frequencies | 134-139, 148-174, 408-412, 450-470, 929-932 MHz |
| Channel Spacing | 25 KHz (12.5kHz optional) |
| Data rate | 512-2400 pocsag, 1600/2 -6400/4 Flex |
| Freq. Deviation | +/- 4,5 KHz |
| Rx Sensitivity | 5 uV at 1200 bps |
| Selectivity | better than 60 dB |
| Image Rejection | better than 55 dB |
| Spurious Rejection | better than 55 dB |
| Frequency Stability | 10 ppm at -10C~+60C |
| Antenna | 50 Ohm BNC (VHF & UHF), SMA (900MHz) |
| Power | 10-32VDC (12VDC nominal) |
| Current | Typical 30mA in standby, 300mA max |
| Physical | 104 x 57 x 14 (mm) |
| Operating Temp. | -10 -+70degC (-40 – +70degC version available) |
| Relays | Rated 1A @ 12VDC |
The output configuration is dependent on the product version selected. The following outputs are optionally available:
- 1 Serial data input/output
- 2 Relay outputs
- Modem control
- Pocsag encoder output
- Transmitter control (PTT)
- TNPP encoding and decoding
- Relay Control Module outputs (27 relays per module – external)
FAQ
1. What is a paging serial receiver and how does the PSR3000 work in real-world applications?
The PSR3000 paging serial receiver receives wireless paging signals that are then converted to serial data so that they can be sent to other systems. In the real world, the receiver can automate, alert remotely and control devices by triggering actions based on the messages received, and is a great device for industrial monitoring and communication systems.
2. Can the PSR3000 paging receiver be used for industrial automation or remote control systems?
The PSR3000 is used extensively in the automation of various industrial and remote control areas; it receives a paging signal, translating it into a command that will activate a relay or other device, enabling the automation of business processes, allowing for remote system monitoring and enabling the immediate response to urgent alerts.
3. How do I integrate the PSR3000 with existing equipment using a serial interface?
The PSR3000 can be integrated into your current setup using its standard serial communication interface. This allows paging data that has been received to be routed directly to controllers, PLCs, or computers. Generally, configuration of the equipment will require configuration of communication parameters as well as mapping incoming messages to particular system actions/commands.
4. What are the main features and technical specifications of the PSR3000 paging serial receiver?
High-sensitivity signal reception, serial data output capabilities, support of paging protocol types & multiple integration options are standard features of the PSR3000. The PSR3000 is built to be a reliable product for use in harsh working conditions while still providing reliable & consistent performance across applications such as telemetry, automation & emergency alerting systems.
6. How can I use the PSR3000 to trigger relays or control external devices remotely?
The PSR3000 can trigger relays or control external devices by converting received paging messages into serial commands. These commands can be programmed to activate relays, alarms, or machinery, enabling remote control over systems without requiring internet connectivity or complex infrastructure.
7. What industries commonly use paging receivers like the PSR3000 for communication or monitoring?
Industries such as manufacturing, healthcare, logistics, utilities, and security commonly use paging receivers like the PSR3000. These devices support reliable communication, remote monitoring, and automation, especially in environments where instant alerts and system responsiveness are critical.